Source-audio Hot Hand USB Bedienungsanleitung PDF herunterladen (Seite 8)

Advanced Features - MIDI Control

In addition to creating MIDI output, the Hot Hand USB Receiver can also receive MIDI messages from

the computer. These incoming MIDI messages can be used to automate settings for a performance by

enabling or disabling any of the 10 MIDI output modules or by recalling an entirely different preset

from the onboard flash memory.

The Receiver will respond to two types of MIDI message inputs:

• Continuous Controllers (CC)

• Program Changes (PC)

Continuous Controller messages can be used to disable or enable any of the ten MIDI modules.

Disabling the modules will “mute” the MIDI output.

Continuous

Controller #

Value < 64 Value>=64

CC 0 Disable Module 1 Enable Module 1

CC 1 Disable Module 2 Enable Module 2

CC 2 Disable Module 3 Enable Module 3

CC 3 Disable Module 4 Enable Module 4

CC 4 Disable Module 5 Enable Module 5

CC 5 Disable Module 6 Enable Module 6

CC 6 Disable Module 7 Enable Module 7

CC 7 Disable Module 8 Enable Module 8

CC 8 Disable Module 9 Enable Module 9

CC 9 Disable Module 10 Enable Module 10

CC 10 Disable All Modules Enable All Modules

MIDI Program Change messages can be used to recall “burned” presets from the Receiver

without opening the Hot Hand USB Editor application at all. This way, it’s not necessary to

have the software running and you can instantly recall up to 128 presets from the flash

memory. There is a one to one relationship between stored presets and incoming Program

Change messages:

Program Change #

PC 1 Recall Preset from memory slot 1

PC 2 Recall Preset from memory slot 2

PC… Recall Preset from memory slot …

Note: The preset burned to memory slot 1 will automatically be recalled when the USB

Receiver is connect to the computer.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Source-audio Hot Hand USB Bedienungsanleitung Seite 8